Why Is My Pool Still Cloudy After Shocking It?

How do you clear up a cloudy pool after shocking it?

Sometimes you’ll get cloudy pool water after shocking.

This is common and should dissipate over time.

Just keep your filter running and it should clear up.

Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite)..

Can you swim in a cloudy pool after shocking?

Wait until the chlorine level in the water drops down to 1-4 parts per million (ppm) before allowing swimmers back into the pool. If the water still looks a little cloudy after the shock treatment, you may want to use a water clarifier before allowing swimmers back into the pool.

What if you put too much chlorine in your pool?

Having too much chlorine in your pool water can be dangerous. Exposure to high levels of chlorine can cause lung irritation, skin and eye damage, and provoke asthma. … High chlorine levels decrease the pH of your pool’s water, making it more acidic. The more acidic the water, the higher the likelihood of corrosion.

Can a cloudy pool make you sick?

The bacteria and algae causing the cloudiness in the water can be harmful if ingested and can make you sick. If your water does have a good chlorine level however you can most likely swim in a cloudy pool.

Will bleach clear up a cloudy pool?

The algae and bacteria start growing, and in a few weeks, you’ll have a cloudy pool. … Chlorine bleach, as discussed above, is not bound to a stabilizer, so when you add chlorine bleach to the pool, it will go right to work killing microbes and sanitizing.

How long will pool be cloudy after shock?

If you add algaecide, keep in mind that some algaecide contains copper, which can actually make a pool cloudy. If the cloudiness persists 24 hours after shocking, then it’s possible that you used a poor-quality chlorine shock.

Can you over shock a pool?

Although, if you overdo the shock treatment, you risk getting green hair from chlorine due to the excess chlorine oxidizing the copper in the water. You can execute a shock treatment with a few different types of pool shock, just be mindful of how much you’re using.

Can I use pool shock and clarifier at the same time?

Never allow pool chemicals to contact each other, even a drop of algaecide, clarifier, antifreeze, or other liquids mixed with chlorine, can erupt into a raging fire. Mixing chlorine and acid (pH down) creates a deadly gas. Mixing different chlorine types can explode when moisture is added.

Can you put too much baking soda in pool?

Yes, putting too much baking soda in pool water can raise the pH and alkalinity level too high. Doing so can lead to calcium buildup in your pool, making the water cloudy. And worse, it may clog your pool filter.

How can I clear my green pool fast?

The fastest and most effective way to clear algae in your pool is to boost your chlorine levels through a shock treatment and an algaecide supplement. For the best results, try using BioGuard Burn Out Extreme supplemented with BioGuard Algi Destroyer.

Does high alkalinity make pool cloudy?

Pool water with a high total alkalinity (TA) is often associated with cloudiness. This is because it can cause an imbalance in the pH levels and lead to calcium scaling. Typically if your TA is higher than 200 ppm, you’re at risk of a cloudy pool and just like imbalanced pH levels, your chlorine will be less effective.

How do I fix cloudy pool water?

Check the Filtration. A pool filterr is designed to clear your water of excess dirt or debris. … Balance the Chlorine. If your filter is clean and working properly, the next step is to test the water and measure the chemical levels. … Adjust the pH. … Clarify the Water. … Preventing Cloudy Pool Water.

Will baking soda clear up a pool?

To cure cloudy pool water, superchlorination is usually the easiest fix. Be sure to test your pH levels after the hyper-chlorination treatment, and slowly add baking soda to your pool water, if needed, to get to between 7.2 and 7.8. Higher pH levels can lead to cloudiness.

How often should you add shock to a pool?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

What happens if you swim in a shocked pool?

Chlorine- based shock contains high levels of pH and will alter both your pH and chlorine levels in the pool. Chlorine- free shock has a neutral pH and will not affect any of your other chemical levels. … And in turn, it will delay your swimmers from returning to the pool.

Can you shock a pool during the day?

Shocking Your Swimming Pool During The Day Shocking gets rid of chloramines and helps bring your pool’s chlorine levels to a well-balanced 3 parts per million (ppm). But while daytime is great for enjoying your pool, it’s the wrong time to shock.

Why did shock make my pool cloudy?

4. FILTER OR PUMP PROBLEMS: If your pool is cloudy immediately after shocking, it’s not a problem with your pump or filter, but if your circulation is poor, or the filter is dirty or clogs up quickly, or if the pump doesn’t run long enough each day – all of these can create a problem with hazy pool water.

Will baking soda kill algae in a pool?

Will baking soda kill algae in a pool? No, baking soda doesn’t kill algae directly! But it’s a natural, safe and effective material in loosening the roots of algae and, thus, killing them. With baking soda, you will have an easier time scrubbing the algae and removing them from a contaminated pool.